The characteristics of a cavitation water tunnel test setup and the experiments of cavitation around different models are given in this paper. Models of test are formed from combination of head and variable length afterbody. The experiments are performed initially with the smooth head and then with the roughened head. Cavitation initiates both in the wake and after the head. If the nose of mode...

Third-generation composite ceramics (eg, Delta; DePuy Orthopaedics, Warsaw, Indiana; Ceramtec, Plochingen, Germany) have greatly improved material characteristics compared with second-generation products. This case report presents a patient after total hip arthroplasty with a fractured ceramic liner and a heavily worn ceramic head (both third-generation ceramics) retrieved 9 months after surger...

BACKGROUND Various fabrication methods are used to improve the stability and osseointegration of screws within the host bone. The aim of this study was to investigate whether roughened surface titanium screws fabricated by electron beam melting can provide better stability and osseointegration as compared with smooth titanium screws in sheep cervical vertebrae. METHODS Roughened surface titan...

The external appearance of brood fish has long been used to assess the stage of sexual development. In some species, males change in appearance during the spawning season (e.g., vivid breeding colors in cichlids, hooked jaw in salmon, and roughened texture of the pectoral fins or head of cyprinids). These physical changes make it relatively easy to identify sexually mature males. However, secon...

In this article, a numerical investigation is conducted to analyze the two-dimensional incompressible Navier–Stokes flows through the artificially roughened solar air heater for relevant Reynolds number ranges from 3800 to 18,000. Twelve different configurations of equilateral triangular sectioned rib (P/e = 7.14–35.71 and e/d = 0.021–0.042) have been used as roughness element. The governing eq...

This thesis determines the response of Left-Handed Media (LHM) to surface effects. A LHM half-space with a roughened interface, modelled by a graded index boundary, is shown to give rise to an analytical solution for the propagation of electromagnetic radiation through this inhomogeneous layer. Significant field localization is generated within the layer, caused by the coherent superposition of...

Quantitative measurements are obtained from high-speed visualizations of pool boiling at atmospheric pressure from smooth and roughened surfaces, using a perfluorinated hydrocarbon (FC-77) as the working fluid. The boiling surfaces are fabricated from aluminum and prepared by mechanical polishing in the case of the smooth surface, and by electrical discharge machining (EDM) in the case of the r...

................................................................................................................................. vii CHAPTER 1 GENERAL INTRODUCTION ............................................................ 1 1.1 General Principles of Equine Fracture Repair........................................................ 2 1.2 Bone Structure and Function. Bone Healing....................

PURPOSE The aim of this study was to evaluate the efficiency of manual polishing over autoglazed and overglazed porcelain and their effect on plaque accumulation. MATERIALS AND METHODS Thirty-six porcelain discs were fabricated out of which 18 each was subjected for autoglazing and overglazing. Half surface of the discs was left intact; the remaining half was roughened with medium grit diamon...

Micro/nano (two-tier) structures are often employed to achieve superhydrophobicity. In condensation, utilizing such a surface is not necessarily advantageous because the macroscopically observed Cassie droplets are usually in fact partial Wenzel in condensation. The increase in contact angle through introducing microstructures on such two-tier roughened surfaces may result in an increase in dro...